Abocom WR404 manual Specifications, General

SPECIFICATIONS

General

Protocols Supported	IP, NAT, ICMP, DHCP client/server, PPPoE, PPP, PAP, CHAP, NTP, HTTP
Firewall /Alert	NAT, Stateful Packet Inspection (SPI), DoS (Denial of Service), Intrusion Detection System (IDS), Attack
	Alert (Email) /Logging, Access Control, Web URL content filtering,
VPN	IPSec (ESP, AH), MD5, SHA-1, DES, 3DES, IKE
IPSec support	IPSec-based 56-bit (DES) or 168-bit (3DES) encryption algorithm, MD5 or SHA-1 hashing algorithm,
	AH/AH-ESP support, PKI features with X.509 v.3 certificate support, remote access VPN (client-to-site), site-
	to-site VPN, IPSec NAT traversal (VPN pass-through)
Management	Web-Based configuration and management, or GUI Setup program for Windows 98/ME/NT/2000/XP
	WELF-based logging format, SYSLOG, e-mail alerts
Functions	802.11d Multiple regulatory domains
	Access Point Radio enable/disable
	Power-saving operation
	Multiple transmit power levels
	Mangement Application Interface (API)
	Hidden SSID
	Multiple SSID
	Intra-BSS Bridging
	Configurable fragmentation & de-fragmentation
	Configurable RTS/CTS access
	Configurable and auto-negotiated long and short preambles
Applications	DDNS (Dynamic DNS), Proxy DNS, UPnP, VPN ( IP- Sec ), Virtual Server, Special Internet Applications,
	Dial-on-Demand and Auto-Disconnect, Authentication with PAP and CHAP for PPPoE
IP addressing	Static IP address assignment on both WAN and LAN
	Internal DHCP server on LAN
	DHCP client on WAN
	PPPoE client support on WAN
Routing	RIP v1, RIP v2 (static routing, dynamic routing)
Network Timer	SNTP
LED Indicators	Power/Error	Green: Power On; Red: System Error
	WAN Link/Act	Green for 100/10M (flashing for activity)
	LAN* Link/Act	Local (1 – 4 ) Green for 100M/10M (flashing for activity)
Firmware Upgrade	HTTP, TFTP download or proprietary network protocol download
LED Indicators	Power/Error	Green: Power On; Red: System Error
	WAN Link/Act	Green for 100/10M (flashing for activity)
	LAN* Link/Act	Local (1 – 4 ) Green for 100M/10M (flashing for activity)
Ports	WAN: 2 x 10/100Mbps RJ-45 port for Cable/DSL Modem
	LAN: 4 x 10/100Mbps switched ports, UTP Category 5 or better (100Base-TX)
Input power	DC 5V, 2.4A