5.Squeeze the Handles together
to close the Straightening
Plates and gently slide the
Straightener through the hair
towards the end within the
designated time, roots to ends
(5-15 seconds).
CAUTION: You must keep the
Straightener moving while
straightening to avoid hair
damage.
6.If hair requires a second pass to
straighten, use less time for the
second pass. Do not repeat
straightening for extended
periods of time as hair is
delicate.
7.The hair will be very hot, allow
to cool before touching. Do not
comb or brush through the hair
to allow the hair to "set in".
8.Work your way up, going on to
the sides and finishing with the
top crown area.
9.How fast or slow you move the
Straightener will have an effect
on the end results.
For a Straight Look
Move the Straightener through the
hair, when you get towards the
ends of the hair pull the
Straightener parallel to the
section you made at the scalp.
For a Rounded Look
Move the Straightener through the
hair, when you get towards the
ends of the hair, position the
Straightener so that it rounds the
hair under.
INSTRUCTIONS FOR
ADAPTOR PLUG USE
1. Check wall outlet to determine
shape of Adaptor Plug needed
2. Make sure unit is OFF before
proceeding.
3. Plug the appropriate Adaptor
Plug into wall outlet.
4. Insert Fold-Away Straightener
plug into Adaptor Plug and slide
the ON/OFF Switch to the ON
position.
5. When straightening is complete
slide the ON/OFF Switch to the
OFF position.
6. Unplug the Adaptor and
Straightener Plugs from wall
outlet and allow the unit to
cool.
7
AC8TST.qxd 6/3/2003 4:01 PM Page 7