AC International UPP

Pocket Programmer Model UPP

INSTALLATION

The Pocket Programmer is designed for indoor use. Simply plug the

appropriate end of the provided AC cord into the top of the UPP, the

other end into any 120-volt outlet anywhere in the house. Once the

Pocket Programmer completes its start up procedure the top two

(of six) selections of the main menu are on the display and it is ready

for use.

FUNCTION

The Pocket Programmer has an LCD display with 2 lines of 16

characters, a diagnostic LED, 7 buttons, a polarized power connector

and a DB-9 port.

BUTTONS: The buttons provide easy navigation through the Pocket

Programmer’s menus on the LCD display.

MENU: Returns the display to the previous menu from any sub-menu,

exits selection without writing to selected device.

UP and DOWN: Provide movement through the menus and toggle

through characters when editing a selection.

RIGHT and LEFT: Provide movement across the display.

ENTER: Enters a selected menu item. Provides movement through

selected menu item editable fields, and executes commands and edits

that are sent to the selected device or network.

DOWN

ENTER

LEFT R