Basic Configuration

3-13

3
CLI – Specify the hostname, location and contact information.
Displaying Switch Hardware/Software Versions
Use the Switch Information page to display hardware/firmware version numbers for
the main board and management software, as well as the power status of the
system.
Field Attributes
Main Board
•Serial Number – The serial number of the switch.
•Number of Ports – Number of built-in ports.
•Hardware Version – Hardware version of the main board.
•Internal Power Status – Displays the status of th e internal power supply.
Management Software
•EPLD Version – Version number of EEPROM Programmable Logic Device.
•Loader Version – Version number of loader code.
•Boot-ROM Version – Version of Power-On Self-Test (POST) and boot code.
Console(config)#hostname R&D 5 4-26
Console(config)#snmp-server location WC 9 4-110
Console(config)#snmp-server contact Ted 4-109
Console(config)#exit
Console#show system 4-60
System description: 24/48 L3 GE Switch
System OID String: 1.3.6.1.4.1.259.6.10.75
System information
System Up Time: 0 days, 7 hours, 0 minutes, and 33.99 seconds
System Name: R&D 5
System Location: WC 9
System Contact: Ted
MAC Address (unit1): 00-30-F1-D4-73-A0
Web Server: Enabled
Web Server Port: 80
Web Secure Server: Enabled
Web Secure Server Port: 443
Telnet Server: Enable
Telnet Server Port: 23
Authentication login: local RADIUS none
Jumbo Frame: Disabled
POST Result:
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
PCI Device 1 Test ............ PASS
Switch Int Loopback Test ..... PASS
Done All Pass.
Console#