Command Line Interface
4-116
4

Command Usage

This command provides information on the community access strings, counter

information for SNMP input and output protocol data units, and whether or not

SNMP logging has been enabled with the snmp-server enable traps

command.

Example
Console#show snmp
System Contact: Paul
System Location: WC-19
SNMP traps:
Authentication: enable
Link-up-down: enable
SNMP communities:
1. alpha, and the privilege is read-write
2. private, and the privilege is read-write
3. public, and the privilege is read-only
0 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
0 Get-next PDUs
0 Set-request PDUs
0 SNMP packets output
0 Too big errors
0 No such name errors
0 Bad values errors
0 General errors
0 Response PDUs
0 Trap PDUs
SNMP logging: enabled
Logging to 10.1.19.23 batman version 1
Console#