Address Table Commands

4-149

4
Address Table Commands

These commands are used to configure the address table for filtering specified

addresses, displaying current entries, clearing the table, or setting the aging time.

Console#show lacp sysid
Channel group System Priority System MAC Address
-------------------------------------------------------------------------
1 32768 00-30-F1-8F-2C-A7
2 32768 00-30-F1-8F-2C-A7
3 32768 00-30-F1-8F-2C-A7
4 32768 00-30-F1-8F-2C-A7
5 32768 00-30-F1-8F-2C-A7
6 32768 00-30-F1-8F-2C-A7
Console#

Table 4-49. show lacp sysid - display description

Field Description
Channel group A link aggregation group configured on this switch.
System Priority* LACP system priority for this channel group.
System MAC Address* System MAC address.
* The LACP system priority and system MAC address are concatenated to form the LAG system ID.

Table 4-50. Address Table Commands

Command Function Mode Page
mac-address-table static Maps a static address to a port in a VLAN GC 4-150
clear mac-address-table
dynamic
Removes any learned entries from the forwarding database PE 4-151
show mac-address-table Displays entries in the bridge-forwarding database PE 4-151
mac-address-table
aging-time
Sets the aging time of the address table GC 4-152
show mac-address-table
aging-time
Shows the aging time for the address table PE 4-152