Basic Configuration

3-9

3
Basic Configuration

Displaying System Information

You can easily identify the system by displaying the device name, location and
contact information.
Field Attributes
•System Name – Name assigned to the switch system.
•Object ID – MIB II object ID for switch’s network management subsystem.
•Location – Specifies the system location.
•Contact – Administrator responsible for the system.
•System Up Time – Length of time the management agent has been up.
These additional parameters are displayed for the CLI.
•MAC Address – The physical layer address for this switch.
•Web server – Shows if management access via HTTP is enabled.
•Web server port – Shows the TCP port number used by the web interface.
•Web secure server – Shows if management access via HTTPS is enabled.
•Web secure server port – Shows the TCP port used by the HTTPS interface.
•Telnet server – Shows if management access via Telnet is enabled.
•Telnet server port – Shows the TCP port used by the Telnet interface.
•Authentication login – Shows the user login authentication sequence.
•POST result – Shows results of the power-on self-test
Web – Click System, System Information. Specify the system name, location, and
contact information for the system administrator, then click Apply. (This page also
includes a Telnet button that allows access to the Command Line Interface via Telnet.)
Figure 3-3. System Information