Quick Installation Guide
Installation
Warning: Please view the README.TXT file on the Ethernet Adapter driver diskette for product related information.
Install the driver as described below:
Windows 95
1.Connect the
2.Insert the Driver Software Diskette.
3.
4.
5.
6.When prompted, connect the
7.You will observe several loading status windows.
8.If prompted to insert the Windows 95
9.When prompted to restart the computer, remove the diskette and click Yes.
Windows 98
1.Connect the
2.Connect the
3.Connect the adapter to the Ethernet network.
4.The New Hardware Wizard displays.
5.When prompted for the installation medium, check Floppy Disk Drive and insert the Driver Software Diskette.
6.Follow displayed instructions.
7.You will observe several loading status windows.
8.When prompted to restart the computer, remove the diskette and click Yes.
When the installation process is complete, remove the diskette from your drive and follow the instructions for restarting your PC. After rebooting your system, the USB Ethernet Adapter will appear to the system as a normal Ethernet network adapter card. For the LED definitions, see "LED functions" below.
Note: If the Wizard does not appear when you plug in the Ethernet Adapter, please view the section "Is USB correctly installed" in the README.TXT file on the Ethernet Adapter driver diskette.
Power Requirements
USB devices can be either
3