ACCUSPLIT® 1120M2

EAGLE

MEMORY PEDOMETER

OPERATING INSTRUCTIONS

Congratulations on taking the first step to wellness with your purchase of an ACCUSPLIT

pedometer. It’s easy to set up your new pedometer. Just follow the steps below, and start walking!

WEARING YOUR PEDOMETER

While gently holding the belt clip open, slide the pedometer onto your belt or the top edge of your pants or skirt. It should fit snugly and level, above one knee.

Note: The pedometer should be as vertical as possible.

Walkers with larger stomachs may find it helpful to wear the pedometer farther back on the body, toward one hip.

To avoid losing or dropping your pedometer, use the included leash and clip to fasten the pedometer securely to your clothing.

Attaching the Leash: Attach the pedometer to the leash by looping the leash around the pedometer belt clip. Next, clasp the waistband of your clothing with the attached clip. You can also use a safety pin to fasten the leash to your clothing, loop the leash through your belt or belt loop, or use a badge holder.

First, loop the pedometer clip

Next, loop the metal clip, then clasp clothing

Or, loop a belt or belt loop

Or, loop a badge holder, then put into pocket

(Badge holder not included)

VIEWING YOUR RESULTS

Once you put on your pedometer, it will automatically begin to record your steps. Press the DAY button to view today’s step count. Press the TOTAL button to view total steps taken.

MODES

“D”– “Day’s Steps”

Counts steps taken since last RESET.

“T”–”Total Steps”

Keeps track of all steps taken, even after Day’s Steps are reset.

TOTAL button

DAY button

AccuSTEP 10000.org

TST D

O

A

T

Y

A

L

TL

 

ACCUSPLIT

EAGLE

1 1 2 0 M 2 T W 1 5 M G

RESETTING YOUR PEDOMETER

Most people prefer to reset step counts daily.

To reset: While displaying Day’s Steps, press and hold DAY button for at least three seconds to reset to zero. When displaying Total Steps, press TOTAL button for three seconds to reset Total and Day’s Steps to zero.

AUTO MOVEMENT SENSOR

1. To filter out random movements, the unit remains in standby mode until 5 continuous steps are registered. Only then are the 5 steps calculated in, and an Active indicator “▲” appears on the upper left of display.

2. When regular walk/run movement stops, after 2 seconds the timer pauses and the unit switches to standby status (Active indicator “▲” disappears).

REPLACING THE BATTERY

When the display starts to dim or goes blank, it is time to replace the battery. Your pedometer uses one Type L1142 (LR43) 1.5 volt silver oxide battery. To replace:

1.Using a jeweler’s screwdriver, loosen small screw on back of unit. Remove back of case.

2.Slide the old battery gently out of its holder. Replace it with a new battery. The battery’s positive (+) terminal should be

FACE UP while you put it into the pedometer.

3.Gently press front and back of pedometer case back together, being sure to line up slots and tabs at top and bottom of unit.

REGISTER NOW Please return your AE1120M2 Registration to the Repair Center address in the warranty, and we will let you know about future products.

Email (preferred) User

ACCUSPLIT, Inc. • 3090 Independence Drive, Suite 148 • Livermore, CA 94551 USA

800-935-1996925-290-1900 • FAX 925-290-1930www.ACCUSPLIT.com • support@ACCUSPLIT.com

970-043

Page 1
Image 1
Accusplit operating instructions Accusplit 1120M2 Eagle, Total button DAY button, Modes

1120M2 specifications

The Accusplit 1120M2 is a highly regarded digital stopwatch, popular for its advanced features and ease of use. Designed for both professional and personal timing needs, this device is perfect for coaches, athletes, and anyone requiring precision timing.

One of the standout features of the Accusplit 1120M2 is its impressive accuracy. This stopwatch boasts a precision of 1/100th of a second, allowing users to measure elapsed time with incredible detail. Whether timing sprints on the track or measuring lap times, the Accusplit 1120M2 ensures that every fraction of a second is accounted for, making it an invaluable tool for competitive events.

The device’s large, easy-to-read display is another key feature. The LCD screen is designed for maximum visibility, even in bright sunlight or low-light conditions. This ensures that users can quickly and easily check their times without losing focus on their activities.

In terms of usability, the Accusplit 1120M2 is designed with a user-friendly interface. It features simple one-touch operation, allowing users to start, stop, and reset the timer effortlessly. This is particularly beneficial during high-intensity activities where split-second decisions matter.

The stopwatch is also equipped with various timing functions, including split timer and lap timer capabilities. Users can record multiple splits and laps during their workouts or events, making it easier to track performance over time. With a memory recall feature, athletes can revisit their previous timings, which is essential for gauging improvement.

Durability is another significant characteristic of the Accusplit 1120M2. Constructed with robust materials, this stopwatch is designed to withstand the rigors of athletic use. It is also water-resistant, ensuring that it can endure exposure to sweat and moisture without compromising functionality.

For those who value portable devices, the Accusplit 1120M2 is lightweight and compact, easily fitting into pockets or bags. This ensures that athletes can easily carry it to events and training sessions without added bulk.

In conclusion, the Accusplit 1120M2 is a top-tier digital stopwatch that combines accuracy, durability, and user-friendliness. Its advanced features make it a favorite among athletes and coaches alike, highlighting its effectiveness in measuring performance and enhancing training outcomes. With its reliable performance and practical design, this stopwatch is truly an essential tool for anyone serious about timing.