ACCUSPLIT® ™ 1540M2
EAGLE
MEMORY PEDOMETER
OPERATING INSTRUCTIONS
RESETTING YOUR PEDOMETER
Most people prefer to reset step counts daily. To reset: When displaying Day’s STEPs, press and hold yellow RESET button for at least 2 seconds to reset to zero. When displaying Total STEPs or DISTANCE, press RESET button for two seconds to reset Total and Day’s STEPs and DISTANCE to zero.
REGISTER NOW Please return your AE1540M2 Registration to the Repair Center address in the warranty, and we will let you know about future products.
Email (preferred) User
REPLACING THE BATTERY
When the display starts to dim or goes blank, it is time to replace the battery. Your pedometer uses one Type LR44 1.5 volt Alkaline battery. To replace:
1.Insert a coin into the slot on the bottom of the case, and twist counterclockwise to loosen the case front. Lift case front away.
See label inside the lid of your pedometer.
2.Using a pen or other thin object, push battery sideways out of its holder. Replace it with a new battery. The battery’s positive
(+) terminal should be FACE UP while you put it into the pedometer.
3.Align case front over the pedometer and press gently to snap cover back into place, starting with top.
Eat Right! Walk More! Live Well!
The ACCUSPLIT Lifestyle
EXCLUSIVE DISTANCE ACCURACY TIP
Maximize the accuracy of your distance measurement by:
•Walking a measured 0.5 or 1.0 mile/km. (We recommend that you use a
•Compare the DISTANCE recorded to the measured distance. If the pedometer shows you walked LESS than you actually did, reset your STRIDE LENGTH to a longer setting. If the pedometer shows you walked MORE than you actually did, reset the STRIDE LENGTH to a shorter setting.
•RESET display to zero.
•Walk the track again to test the adjustment, and
•Once adjusted, DO NOT ALLOW ANYONE ELSE TO CHANGE THE SETTING, because the Activity Pedometer is now set for your style.
•You are now ready to walk any route, change that route freely and still get an accurate measurement of distance for your fitness or recreation program.
