Accusplit AE760M100, AE602M100 2 0 0 W E 1 - 3 A 1 0 3 5 3, Normal Time Mode, Normal Time Setting

Models: AE602M100

1 20
Download 20 pages 2 Kb
Page 5
Image 5
Normal Time Mode

This is only a brief description of these buttons. Detailed uses of the buttons are different in particular functions and will be described later in the instructions.

Pressing [MODE] button will toggle among the modes above. Note that there is no auto-return function in the stopwatch. Whenever you change modes, the stopwatch will remain in that mode until the [MODE] button is pressed again

Each time you enter a mode, a message will be displayed for a second before you enter the mode:

Note:- In the following descriptions, items printed in dark gray stand for flashing digits.

Normal Time Mode

The starting point for operating your stopwatch is NORMAL TIME. If NORMAL TIME is not displayed, press [Mode] until it is.

Year : - 2001

Date : - January 1

Day of week : - Monday

Time : - 12:00 am

The display format is as below :-

2 0 0 1

W E 1 - 3 A 1 0 : 3 5' 3 0

➔ ➔ ➔

year

day, month - date

hr : min second

During clock display, press [START] to switch between 12Hr and 24Hr display mode. To toggle chime ON or OFF, you can press [RESET]. The bell icon will be ON and OFF correspondingly.

Normal Time Setting

Press and hold [RECALL] for 2 seconds to enter setting mode. The normal time setting starts with second. The second digits will then be flashing. You can change the flashing digit by pressing [START] button. To speed up the setting you can press and hold [START] for longer than 2 seconds to activate fast setting. To select other digits, press [RESET] button. The setting order is: Second, Minute, Hour, Year, Month, Date, month-date (m-d)

3

Page 5
Image 5
Accusplit AE760M100, AE602M100, AE790M500DEC 2 0 0 W E 1 - 3 A 1 0 3 5 3, Normal Time Mode, Normal Time Setting