Troubleshooting

Chime does not sound:

Red light on the transmitter does not light. Check battery polarity. Replace the transmitter battery.

Red light on the transmitter does light. Make sure the transmitter and the chime channels are the same (See page 4). Make sure the plug-in chime has power going to it.

Battery seems OK, but the chime does not work when installed:

Do not mount the transmitter on metal or near metal studs. This reduces the transmitter range. Use 1/4" to 1/2" (6 to 13 mm) wood shims to move the transmitter off the metal surface.

Try different locations for the chime closer to the transmitter.

The range of the door sensor system depends on location, temperature, and battery condition.

Technical Service

(Do Not Send Products)

If you experience a problem, follow this guide. You may also want to visit our Web site at: www.desatech.com.

DESA Specialty Products™

P.O. Box 90004, Bowling Green, KY 42102-9004 ATTN: Technical Service Specialty Products

No Service Parts Available for this Product

Regulatory Information

This device (Models SL-6166-RX-A and SL-6168-TX) complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.

The user is cautioned that changes or modifications not expressly approved by the party responsible for regulatory compliance could void the user's au- thority to operate the equipment.

598-1073-02

-5-

Page 5
Image 5
Ace Hardware 3003530 (AC-6168) manual Troubleshooting, Technical Service, Regulatory Information, Do Not Send Products