Windows NT

11.If there is an existing Mylex driver in the system you will see the box shown below in Figure 3-9.Click New to install the new driver from the diskette.

W

3 I

N

N

T

Figure 3-9. Install the New Driver from Diskette

12.Again, be sure the path is A:\NT4 as shown in Figure 3-10and click Continue.

Figure 3-10. Confirm Diskette Driver Path

The driver is copied from the diskette. The System Settings Change box is displayed as shown in Figure 3-11.

Figure 3-11. Driver Installation Complete - DO NOT Restart

13.Click No at this time if you choose to install the Mylex Accelerated Driver before restarting Windows NT 4.0. Do not install the Accelerated Driver if you will be using Clustering or PCI Hot Plug, or when mixing earlier and current Mylex controller.

(Please refer to the README file for details.) Continue with Step 14.

Manual No. 775079

3-9