Installing the Mylex Disk Array Controller into an Existing Windows NT 4.0 System

19.If there is an existing Mylex driver in the system you will see the box shown below in Figure 3-16.Click New to install the new driver from the diskette.

Figure 3-16. Install the Accelerated Driver from Diskette

20.Again, be sure the path is A:\DISK as shown in Figure 3-17and click Continue.

Figure 3-17. Confirm Diskette Accelerated Driver Path

The driver is copied from the diskette. The System Settings Change box is displayed as shown in Figure 3-18.

Figure 3-18. Driver Installation Complete - Restart

21.Remove the diskette and click Yes to restart Windows NT 4.0 for the new Mylex Disk Array Controller drivers to be available.

3-12

PCI Disk Array Controller Drivers Manual