Acer 220 Series connectors and there is only one PS/2 port on the computer., The printer does not work., I want to set up my location to use the internal modem.

3 Troubleshooting my computer48
connectors and there is only one PS/2 port on the computer.
To connect two PS/2-type devices to the computer, you need to use an
optional PS/2 Y-bridge connector.
The printer does not work.
Check the following:
•Make sure that the printer is connected to a power outlet and that
it is turned on.
•Depending on your connection (USB or parallel), make sure that
the printer cable is connected securely to the appropriate port on
your computer and the corresponding port on the printer.
•During POST, press F2 to access the BIOS Utility and verify that the
parallel port is enabled if you use a parallel printer.
I want to set up my location to use the internal modem.
To properly use your communications software, you need to set up
your location:
1Click on Start, Control Panel.
2Double-click on Phone and Modem Options.
3Click on the Dialing Rules tab and begin setting up your location.
Refer to Windows Help and Support.
220.book Page 48 Tuesday, October 23, 2001 10:54 AM