Service Guide 2-3
7. If installing a second soDIMM, repeat Step 6.
8. Reinstall the Expansion Memory Access Cover using the screw removed in Step 4.
9. Replace the Keyboard Assembly and any components previously removed. Replace the AC
adapter.
10. Power up the notebook and reboot. If all of the installed memory is not recognized, try
reseating the soDIMM module(s) and rebooting.
Note: After installing expansion memory in your notebook, you must run the PHDISK utility in
order for the Save-To-Disk or 0V Suspend functions to operate correctly.

2.3.2 Setting up the Software

After installing expansion memory, perform the following procedure:
1. Run PHDISK.
In Windows 95
1. From the Taskbar, select Start, then Shut Down.
2. Select the "Restart the Computer in MS-DOS mode" option.
3. Click on Yes.
4. Type PHDISK/C/F at the DOS prompt.
In Windows for Workgroups and Windows NT
1. Exit all applications and exit Windows to DOS.
2. At the DOS command prompt, type PHDISK/C/F. This will create a file which can be
used to save the contents of your memory system when you perform a 0V Suspend
operation