TROUBLE SHOOTING
|
| Check the information in this section to see if the problems can be solved before |
|
| requesting repair. |
|
| Note：The consumers are only allowed to solve the problems described as below. |
|
| Any unauthorized product modification, or failure to follow instructions |
|
| supplied with the product will end the warranty immediately. |
| No image | Make sure power button is ON. |
|
| Check whether the LCD monitor and computer power cords are plugged and |
|
| whether there is a supply of power. |
| No Signal Input | Check the signal connection between the computer and LCD monitor. |
| “Out Of Range” | Check the computer image output resolution and frequency and compare the value |
| Fuzzy image | with the preset values (Please refer to |
| Adjust Phase. | |
| Image too bright | Adjust brightness and contrast by OSD. |
| Image too dark |
|
| Irregular image | Check the signal connection between the computer and LCD monitor. |
|
| Perform Auto Adjust. |
|
|
|
English
Distorted image
Image is not centered Size is not appropriate
Uneven color Color too dark Dark area distorted White color is not white
Can’t adjust LCD monitor with the buttons in the front.
The other problem
Reset the LCD monitor. (perform the “Recall” function by OSD) Take off extra accessories (such as signal extension cord).
Use OSD Image Menu to adjust H. Position and V. Position.
Check image size setting.
Perform Auto Adjust.
Use OSD Color Menu to adjust color setting.
Please contact the stores where you purchased the unit or service center listed at your warranty card.
8
