There is one LED on the bracket to indicate the link status. LED color : Green

LED ON: the 10Base-T link connection is successful.

LED OFF: the 10Base-T link is NOT successful

Remote boot ROM socket: their is a ROM socket on this adapter card to support remote boot ROM.

2. Quick Installing Guide

Follow these steps to install the card:

1.Power off PC & remove cover.

2.Plug in adapter card & connect cable to BNC or RJ-45.

3.Replace the cover & Power on PC

4.Check the systems BIOS setup. Configure the appropriate PCI setting.

5.Reset PC & configure your network system.

Page 3
Image 3
Acer ALN-201 manual Quick Installing Guide