Error Message List
Error Messages | FRU/Action in Sequence |
|
|
Real time clock error | RTC battery |
| Run BIOS Setup Utility to reconfigure system time, then reboot |
| system. |
| System board |
|
|
Previous boot incomplete - Default configuration | Run “Load Default Settings” in BIOS Setup Utility. |
used | RTC battery |
| System board |
|
|
Memory size found by POST differed from | Run “Load Default Settings” in BIOS Setup Utility. |
CMOS | DIMM |
| System board |
|
|
Diskette drive A error | Check the drive is defined with the proper diskette type in BIOS |
| Setup Utility |
| See “External Diskette Drive Check” on page 74. |
|
|
Incorrect Drive A type - run SETUP | Check the drive is defined with the proper diskette type in BIOS |
| Setup Utility |
|
|
System cache error - Cache disabled | System board |
|
|
CPU ID: | System board |
|
|
DMA Test Failed | DIMM |
| System board |
|
|
Software NMI Failed | DIMM |
| System board |
|
|
DIMM | |
| System board |
|
|
Device Address Conflict | Run “Load Default Settings” in BIOS Setup Utility. |
| RTC battery |
| System board |
|
|
Allocation Error for device | Run “Load Default Settings” in BIOS Setup Utility. |
| RTC battery |
| System board |
|
|
Failing Bits: nnnn | DIMM |
| BIOS ROM |
| System board |
|
|
Fixed Disk n | None |
|
|
Invalid System Configuration Data | BIOS ROM |
| System board |
|
|
I/O device IRQ conflict | Run “Load Default Settings” in BIOS Setup Utility. |
| RTC battery |
| System board |
|
|
Operating system not found | Enter Setup and see if fixed disk and drive A: are properly identified. |
| Diskette drive |
| Hard disk drive |
| System board |
|
|
80 | Chapter 4 |
