43
Parameter Description Options
Soft-off by
PWR/BTTN
When Enabled, turning the
system off with the on/off
button places the system in a
very low-power-usage state,
with only enough circuitry
receiving power to detect power
button activity or Resume by
Ring activity.
[Instant-off]: Press down button
then power off instantly
[Delay 4 Sec.]: Press Power button 3
sec. to power off. Enter suspend if
button is pressed less than 4 sec.
WOL
(PME#)
From
Soft-Off
This category enables or
disables wake-on-Lan from
soft-off
[Enabled], [Disabled]
Resume by
Alarm
You can set “Resume by Alarm”
item to enabled and key in
Date/Time to power on system.
[Disabled]
[Enabled]: Enable alarm function to
Power On system. If RTC Alarm
Lead to Power On is Enabled,
Date( of Month) Alarm: Everyday,
1~31 Time(hh:mm:ss) Alarm:
(0.~23):(0-59):(0~59)
POWER ON
Function
Select the method to power on
the system
[Button Only], [Keyboard 98], [Hot
Key], [Mouse Left], [Mouse Right]
POWER
After
PWR-Fail
This field allows you to
determine the power status to
on/off or former-sts after the
system
[FORMER-Sts], [On], [Off]