System Tour 2-15

The eject menu commands allow you to perform various eject-related

functions for the notebook. See the following table for details

Table 2-6 Eject Menu Descriptions
Select… To…
Battery Change the battery.
This option forces the notebook to enter suspend-to-disk mode,
so that you can replace the battery with a charged one, and then
return to where you left off.
To resume, close the display lid and open the display lid again.
CD-ROM Disc Open the CD-ROM drive.
There are many ways to open the CD-ROM disc tray:
• selecting this option
• pressing Fn-1
• pressing the CD-ROM eject button
• using software controls
It is best to wait for the CD-ROM light (found on the CD-ROM
eject button) to go off before ejecting the CD-ROM drive.
Power Off Turn the system off (without entering suspend mode).
When you choose this option, a “cold boot” occurs after re-
starting the system (closing and opening the display). You can
choose this option when you want to swap modules, or when
you want to turn off the notebook without entering any of the
suspend modes. Note however that the proper way to power off
the system in Windows 95 is to use the Shutdown command.
To turn the notebook back on, close the display lid and open the
display lid again.