Appendix C: SATA RAID configuration utility
100
Server BIOS settings
Your system’s BIOS settings must be modified to enable SATA RAID.
Follow the steps below to change the BIOS settings and enable RAID
configuration.
1 Enter the BIOS Setup utility by pressing F2 when prompted during
system startup. See “Entering BIOS setup” on page 60 for more
information.
2 Select the Advanced menu as shown below.
3 Change the “Serial ATA” and “Serial ATA RAID” parameters to
ENABLED.
4 Press the F10 key to save the changes and exit the BIOS Setup
environment.
BB!S421!.!FO/cppl!!Qbhf!211!!Xfeoftebz-!Nbsdi!35-!3115!!6;1:!QN