Acer R3610 manual Bios Messages Action/FRU

BIOS Messages	Action/FRU
Hard disk(s) diagnosis fail	The system may run specific disk diagnostic
	routines. This message appears if one or more
	hard disks return an error when the diagnostics
	run.
Keyboard Error Or No Keyboard Present	Cannot initialize the keyboard. Make sure the
	keyboard is attached correctly and no keys are
	pressed during POST. To purposely configure the
	system without a keyboard, set the error halt
	condition in Setup to HALT ON ALL, BUT
	KEYBOARD. The BIOS then ignores the missing
	keyboard during POST.
Keyboard is locked out - Unlock the key	This message usually indicates that one or more
	keys have been pressed during the keyboard
	tests. Be sure no objects are resting on the
	keyboard.
Memory Test:	This message displays during a full memory test,
	counting down the memory areas being tested.
Memory test fail	If POST detects an error during memory testing,
	additional information appears giving specifics
	about the type and location of the memory error.
Override enabled - Defaults loaded	If the system cannot boot using the current CMOS
	configuration, the BIOS can override the current
	configuration with a set of BIOS defaults designed
	for the most stable, minimal-performance system
	operations.
Press TAB to show POST screen	System OEMs may replace the Phoenix
	Technologies Award BIOS POST display with their
	own proprietary display. Including this message in
	the OEM display permits the operator to switch
	between the OEM display and the default POST
	display.
Primary master hard disk fail	POST detects an error in the primary master IDE
	hard drive.
Primary slave hard disk fail	POST detects an error in the secondary master
	IDE hard drive.
Secondary master hard disk fail	POST detects an error in the primary slave IDE
	hard drive.
Secondary slave hard disk fail	POST detects an error in the secondary slave IDE
	hard drive.

41 Chapter 4