PROBLEM There is no picture on LCD Monitor
The picture is unclear and unstable, please perform the following steps :
1. Enter PC to "Shut Down Windows" status whileyou're in MS-Windows environment.
2. Check the screen to see if there's any black verticalstripes appear. If there are,take advantage of the "Clock"
function in OSD menu and adjust (by increment or decrementnumbers)until those bars disappear.
3. Move to "FOCUS" function in OSD menu again and adjust themonitor screen to its most clear display.
4. Click "No" on "Shut Down Windows" and back to the normal PC operating environment.
If there's no picture on the LCD Monitor, please performthe following steps:
1. Make sure the power indicator on the LCD Monitor isON, all connections are secured,and the system is running
on the correct timing. Referto Chapter 3 for information on timing.
2. Turn off the LCD Monitor and then turn it back on again. If there is still no picture,press the Adjustment Control
button several times.
3. If step 2 doesn't work, connect your PC system to another external CRT.If your PC system Functions properly with
a CRT Monitor but it does not functionwith the LCD Monitor,the output timing of the VGA card may beout of the
LCD's synchronous range.
Please change to an alternative mode listed in the Standard Timing Table or replace the VGA card,and then repeat
steps 1 and 2.
If you have chosen an output timing that is outside of the LCDMonitor's synchronous range (Horizontal:31.5 ~ 80 KHz
and Vertical:56 ~ 75 Hz), the OSD will display a "Input not support" message. Choose a mode that is supported by your
LCD Monitor. Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will
displaya message "No Signal".
Caution: Do not attempt to service the monitor yourself or open the computer yourself.
Please refer all servicing to qualified service personnelif the problems cannot be solved in"Troubleshooting" section.
PROBLEM Picture is unclear and unstablePROBLEM There is no picture on LCD Monitor
11