- 9 -
ELECTRICAL REQUIREMENTS
Standard Test Conditions
All tests shall be performed under the following conditions, unless otherwise specified.
Ambient light : 225 lux
Viewing distance : 50 cm in front of LCD panel
Warrn up time
All specifications : 30 minutes
Fully functional : 5 seconds
Measuring Equipment : Chroma 2250 signal generator or equivalent, directly
Connected to the monitor under test.
Minolta CA100 photometer, or equivalent
Control settings
User brightness control : Maximum (unless otherwise specified )
User contrast control: Typical (unless otherwise specified )
User red/ white balance,
Green/white balance and
Blue/white balance control : In the center (unless otherwise specified )
Power input: 110Vac or 230Vac
Ambient temperature: 20 ± 5 ˚C ( 68 ± 9 ˚ F)
Analog input mode: 1280 x1024 /60 Hz
MEASUREMENT SYSTEMS
The units of measure stated in this document are listed below:
1 gamma = 1 nano tesla
1 tesla = 10,000 gauss
cm = in x 2.54
lb = kg x 2.2
degrees F = [°C x 1.8] + 32
degrees C = [°F - 32]/1.8
u' = 4x/(-2x + 12y + 3)
v' = 9y/(-2x + 12y + 3)
x = (27u'/4)/[(9u'/2) - 12v' + 9]
y = (3v')/[(9u'/2) - 12v' + 9]
nits = cd/(m2) = Ft-L x 3.426
lux = foot-candle x 10.76
LCD monitor General specification
Panel Type: 19 “ active matrix color TFT LCD
1). LG LM190E03-B4
2). LG LM190E03-B4N9
3). Samsung LTM190EX-L01
4). AU M190EN04 V5
Display size: 376.32mm (H) × 301.056mm(V)
Display mode: VGA 720 × 400 (70 Hz)
VGA 640 × 480 (60/66/70/72/75 Hz)
SVGA 800 × 600 (60/70/72/75 Hz)
XGA 1024 × 768 (60/70/75 Hz)
SXGA 1280 × 1024 (60/70/75 Hz) standard resolution
Pixel pitch: 0.294mm(H) × 0.294mm(V)