EN-11
X243W
Standard Timing Table
ModeResolution
1VGA720 x 40070Hz
2VGA640 x 48059.94Hz
3VESA640 x 48075Hz
4VESA800 x 60060Hz
5VESA800 x 60075Hz
6VESA1024 x 76860Hz
7VESA1024 x 76875Hz
8VESA1280 x 102460Hz
9VESA1280 x 102475Hz
10CVT red1440 x 90060Hz
11CVT1440 x 90060Hz
12CVT1440 x 90075Hz
13CEA 8611280 x 72060Hz
14CVT red1284 x 80060Hz
15CVT1284 x 80075Hz
16VESA1600 x 120060Hz
17CVT red1600 x 120060Hz
18CVT1680 x 105060Hz
19CVT red1680 x 105060Hz
20CVT red1920 x 120060Hz
21CVT1920 x 120060Hz
To reduce the need for adjustment for different modes, the monitor has
default setting modes that are most commonly used as given in the table
below. For optimum adjustment, the user is suggested to perform the
Auto Setup under Windows “Full Screen“ pattern or using the pattern in
the floppy disk provided. When none of the mode is matched, the user can
store their preferred modes in the user modes. The monitor is capable of
storing up to 9 user modes. The only condition to store as a user mode is
the new display information must have 1 KHz difference for horizontal
frequency or 1 Hz for vertical frequency or the sync signal polarities are
different from the default modes.