Acnodes RMC 7185 Installing the System into a Rack

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7185

1U Rackmount System

Installing the System into a Rack

This section provides information on installing the Acnodes RMC7185 into a rack. If the system has

already been mounted into a rack, you can skip ahead to Sections 2-5 and 2-6. Note: This rail will fit a

rack between 26" and 33.5" deep.

There are a variety of rack units on the market, which may mean the assembly procedure will differ

slightly. The following is a guideline for installing the RMC7185 into a rack with the rack rails provided.

You should also refer to the installation instructions that came with the rack unit you are using.

Identifying the Sections of the Rack Rails

Each assembly consists of two sections: an inner fixed chassis rail that secures directly to the server

chassis and an outer fixed rack rail that secures directly to the rack itself.