Acnodes RPS 1200, RP 1205, RP 1170 Regulatory Notice, Legal Information, Safety Instructions

1.2Regulatory Notice

Legal Information

First English printing, October 2002

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that

results from the use of this equpiment.

Safety Instructions

»Unplud equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

»Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-condition environment with temperatures not exceeding 40° Celsius (104° Fahrenheit).

»When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing damage to other equipment or injury to persons nearby.

»When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply. Proper air convection is necessary to keep it from overheating

»Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

»If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current labeled on the equipment’s electrical rating label. The voltage rating on the cord should be higher than the one listed on the equipment’s rating label.

»Observe all precautions and warnings attached to the equipment.

»If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being damaged by transient over-voltage.

»Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power supply or on other hardware may cause damage, fire or electrical shock.

»Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and invalidate its warranty.

»If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tion.

Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. The equip- ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

»Re-position or relocate the receiving antenna

»Increase the separation between the equipment and receiver.

»Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

	© Copyright 2011 Acnodes, Inc.
14628 Central Blvd,	All rights reserved. Product description and product specifications
Chino, CA91710	are subject to change without notice. For latest product information,
tel:909.597.7588, fax:909.597.1939	please visit Acnodes’ web site at www.acnodes.com.