v2.0 (1.0.2.0) (EN/F)
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
user manual guide de l’utilisateur
ARS3i
• Use only with the
cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the
apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from
shall be placed on the apparatus.
• Always leave sufficient space around |
the product for ventilation. Do |
not place product in or on a bed, |
rug, in a bookcase or cabinet that |
may prevent air flow through vent |
openings. |
• Do not place lighted candles, |
cigarettes, cigars, etc. on the |
product. |
the apparatus.
•Attention should be drawn to the environmental aspects of battery disposal.
•The use of apparatus in moderate climates.
Important battery precautions
• Any battery may present a risk of |
Ecology
Help protect the environment - we recommend that you dispose of used batteries by putting them into specially designed receptacles.
FCC Information
that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Audiovox Electronics Corp. could void the user’s authority to operate the equipment.
EN/F
It is important to read this user manual prior to using your new product for the first time. Nous vous recommandons de lire ce manuel avant d’utiliser votre nouveau produit pour la première fois.
Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use.
•Read these instructions.
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water.
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer.
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
ADDITIONAL SAFETY INFORMATION
•The AC/DC adapter supplied with this product is intended to be correctly oriented in a vertical or floor mount position.
•Do not use unauthorized chargers or power adapters. Use only chargers or power adapters that came with your product or that is listed in the user’s guide.
•Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
• Connect power cord only to AC |
power source as marked on the |
product. |
• Care should be taken so that objects |
do not fall into the product. |
• Do not attempt to disassemble |
the cabinet. This product does |
not contain customer serviceable |
components. |
• The marking information is located |
at the bottom of apparatus. |
• To be completely disconnect the |
power input, the AC/DC adaptor |
of apparatus shall be disconnected |
from the mains. |
• AC/DC adaptor is a disconnect |
device. The AC/DC adaptor should |
not be obstructed OR should be |
easily accessed during intended use. |
• Battery shall not be exposed to |
excessive heat such as sunshine, fire |
or the like. |
• The ventilation should not be |
impeded by covering the ventilation |
openings with items such as |
newspaper, |
• No naked flame sources such as |
lighted candled should be placed on |
fire, explosion, or chemical burn |
if abused. Do not try to charge a |
battery that is not intended to be |
recharged, do not incinerate, and |
do not puncture. |
• |
alkaline batteries, may leak if left in |
your product for a long period of |
time. Remove the batteries from the |
product if you are not going to use |
it for a month or more. |
• If your product uses more than one |
battery, do not mix types and make |
sure they are inserted correctly. |
Mixing types or inserting incorrectly |
may cause them to leak. |
• Discard any leaky or deformed |
battery immediately. They may |
cause skin burns or other personal |
injury. |
• Please help to protect the |
environment by recycling or |
disposing of batteries according to |
federal, state, and local regulations. WARNING: The battery (battery or batteries or battery pack) shall not
be exposed to excessive heat such as sunshine, fire or the like.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from
This Class B digital apparatus c omplies with Canadian
Important information
Technical information | “Made for iPod” and “Made for | |
Product: Digital Photo Frame for | iPhone” mean that an electronic | |
iPhone/iPod | accessory has been designed to | |
Brand: Acoustic Research | connect specifically to iPod or iPhone, | |
Model: ARS3i | respectively, and has been certified | |
| by the developer to meet Apple | |
For your records | performance standards. Apple is not | |
responsible for the operation of this | ||
In the event that service should be | device or its compliance with safety and | |
regulatory standards. | ||
required, you may need the model | ||
| ||
number and the serial number. In the | iPhone, iPod, iPod classic, iPod nano | |
space below, record the date and place | ||
and iPod touch are trademarks of Apple | ||
of purchase and the serial number: | ||
Inc., registered in the U.S. and other | ||
Model No.: | ||
countries. | ||
Date of Purchase: | ||
| ||
Place of Purchase: |
| |
Serial No.: |
| |
Electrical power information |
| |
AC/DC Adaptor: |
| |
Input: 100 |
| |
Output: 6 V DC, 3A |
|
Before you begin
Dear Acoustic Research customers, Thank you for puchasing the Acoustic Research digital photo frame for iPhone/iPod. This product includes a 7” (16:9 Aspect Ratio) TFT Liquid Crystal Display (LCD) monitor, clock function, music playback, photo function, video function and support SD/MMC/MS memory cards or USB flash drives.
This product plays mp3 and Windows Media™ audio (WMA) content.
To start using your digital photo frame for iPhone/iPod, please follow the instructions in the following sections.
Unpacking the unit
You should find the following items in the box:
•digital photo frame for iPhone/iPod
•AC/DC power adapter
•Rod support
•User manual
•muvee software CD ROM
Installing the rod support
Screw the rod support into the hole at the rear to support the unit.
Connect the main unit power
•Connect the supplied power adapter to the product’s DC 6V jack, and connect to a convenient wall outlet.
•Once connected with power and switch the ON/OFF button to ON, the Main menu appears.
•Refer to the following pages for more information on setting up date, time, playing music and video and viewing photos.
Battery
This digital photo frame for iPhone/iPod is equipped with a memory holding system that can be powered with 2 “AAA” batteries (not included). The power failure protection circuit will not operate unless batteries are installed. When normal household power is interrupted, or AC/DC power adapter is unplugged, the batteries will power the digital photo frame to keep track of time settings programmed into memory.
To install or replace the batteries:
1.Remove battery compartment door (located at the rear of the digital photo frame) by applying thumb pressure to the tab on battery door and then lift the door out and off the cabinet.
2.Insert or replace 2 AAA batteries.
3.Replace the compartment door.
•It is recommended to plug the unit for AC power while replacing batteries to avoid the loss of clock and mode settings.
Power failure indicator
When AC power is interrupted (disconnected) for a short period of time, time settings will change (unless batteries are installed). After AC power is restored (reconnected), the Digital Display will blink to indicate that power was interrupted and you should readjust the time settings.
General controls
Top view
Rod support
Universal dock for iPod
– Go to Main menu
, | , | or |
|
| Front view |
|
|
| Speaker | |||||
– | Menu mode: press to navigate in |
| Display |
|
|
| ||||||||
|
|
|
|
|
| |||||||||
| menus in the indicated directions |
|
|
|
|
|
|
|
|
| ||||
– Photo, music and video mode: press |
|
|
|
|
|
|
|
|
| |||||
| or | to skip to previous or next |
|
|
|
|
|
|
|
|
| |||
| file; press | or | to adjust the |
|
|
|
|
|
|
|
|
| ||
| volume |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
| |||
– | Photo mode: press and hold or |
|
|
|
|
|
|
|
|
| ||||
| to listen to previous or next music if |
|
|
|
|
|
|
|
|
| ||||
|
|
| Universal dock for iPod | |||||||||||
| background music is on |
|
| |||||||||||
| Back view |
|
|
|
|
| ||||||||
| – Enter the selected mode; press |
|
|
|
|
| ||||||||
| POWER ON/OFF– To turn on/off the | |||||||||||||
to play/pause music, photo and video | ||||||||||||||
unit |
|
|
|
|
| |||||||||
playback; press and hold to stop |
|
|
|
|
| |||||||||
|
|
|
|
|
|
|
|
| ||||||
playback and return to music list or | Battery compartment – To install | |||||||||||||
thumbnail mode |
| |||||||||||||
| 2 x AAA batteries |
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
| |||||
EDIT – Enter or exit the
MUSIC ON/OFF – Turn on/off the background music during slideshow in Photo mode; turn on/off the music in the music mode.
Windows Media is trademarks of Microsoft Corporation in the United States and other countries.
General controls | Clock |
iPod/iPhone
Music
Side view
SD/MMC/MS card slot
USB connector
DC jack 
Rod support
SD/MMC/MS card slot – To insert SD/ MMC/MS card
USB connector – To connect to USB device
DC jack – Connect to the power adapter
In Main menu mode, when there is no operations for about one minute, slideshow
will be automatically started. The priority of photos to be displayed in the slideshow is first photos on Card, then USB devices and lastly photos stored in the internal memory of the
unit (i.e. Favorites 
)
Setting date and time
1.In Main menu, press 
or 
to select 
. Press 
to enter Settings menu.
2.Press 
or 
to highlight the Date or Time.
3.Press 
or 
to highlight the option.
4.Press 
or 
to change the values and then press 
to confirm.
5.Press 
or 
to highlight the Time Format.
6.Press 
or 
to change the values and then press 
to confirm.
7.Press 
to exit Settings menu. You can also press 
or 
to highlight Exit to exit Settings menu.
Entering clock mode
1.In Main menu, press 
or 
to select
. Press 
to enter Clock mode. Clock and calendar will be displayed.
2.Slideshow will then be started. The priority of photos to be displayed in the slideshow is first photos on Card, then USB devices and lastly photos stored in the internal memory of the unit (i.e. Favorites 
).
Connecting iPod/iPhone
1.Slide the speaker to the right to open the universal dock for iPod.
2.Place the appropriate adapter provided with your iPod/iPhone and then place your iPod/iPhone on the universal dock for iPod/iPhone.
Charging the iPod/iPhone
You may charge the battery of your iPod/iPhone through the universal dock for iPod while the unit is turned off (standby mode) or in the Music, Photo, Clock or iPod/iPhone mode. Charging control should be operated on the iPod/ iPhone. It is not necessary to charge in iPod mode, unless you are listening to the iPod.
Made for:
• iPhone 3GS 16GB, 32GB
•iPhone 3G 8GB, 16GB
•iPod touch 3rd generation 32GB, 64GB
•iPod touch 2nd generation 8GB, 16GB, 32GB, 64GB
•iPod touch 1st generation 8GB, 16GB, 32GB
•iPod nano 5th generation 8GB or 16GB
•iPod nano 4th generation (video) 8GB, 16GB
•iPod nano 3rd generation (video) 4GB, 8GB
•iPod classic 80GB, 120GB, 160GB
•iPod nano 2nd generation (aluminum) 2GB, 4GB, 8GB
•iPod nano 1GB, 2GB or 4GB
•iPod 5th generation (video) 30GB, 60GB, 80GB
•iPod mini 4GB, 6GB
•iPod 4th generation 20GB, 40GB
•iPod 4th generation (color display) 20GB, 30GB, 40GB, 60GB
Listening to iPod/iPhone
•Dock your iPod/iPhone to the universal dock.
•In Main menu, press 
or 
to select iPod/iPhone (
). Then press 
.
•Press 
or 
to select 
for music,
or select 
for photo or video and press 
.
•Playback of music file from the iPod/ iPhone starts automatically.
•Press 
or 
to skip to the previous or next music file. Press and hold 
or 
to search backward or forward for a music file.
•Start playback of photo or video files on your iPod/iPhone manually first. The iPod/iPhone cannot play video automatically.
•Use the controls on iPod/iPhone for photo and video files playback.
•If no iPod/iPhone is connected in the iPod mode, the unit will show “The selected device is not connected”.
Upgrade the latest iPod/ iPhone firmware from Apple official website.
Playing music
• The unit can only support 
USB flash drive and 
memory card which formatted in file system of FAT or FAT32.
•The supported music file formats include mp3, WMA & WAV.
1.Insert an SD, MMC or MS card into the SD/MMC/MS card slot or insert a USB flash drive into the USB connector.
2.In Main menu, press 
or 
to select the source of music from
Card (
), USB (
) or Favorites (
). Then press 
.
3.Press 
or 
to select 
and press 
.
4.Press 
or 
to select the file you want to play.
5.Press 
or MUSIC ON/OFF to start playback.
6.To pause the playback, press 
. Press 
again to resume playback. Press MUSIC ON/OFF to stop playback.
7.Press 
or 
to select the previous/ next file. Press and hold 
or 
to rewind or fast forward.
8.Press 
or 
to adjust the volume.
The volume bar 
will be displayed for a while once you change the volume.
If no music files are found in 
your selected source, “No file 
in the selected device” will be displayed.
Copying music
1.During playback of music files on SD, MMC or MS card or USB, press EDIT to enter the
2.Press 
or 
to select Copy and then press 
.
3.“Copy to internal memory? If the
same file exist will be overwritten.”
will be displayed. Press 
or 
to select Yes and then press 
to confirm.
4.“Copy successfully!” will be displayed. If the unit does not have enough free internal memory, “No enough memory” will be displayed. Delete some files before you try to copy files again.
5.Press EDIT or press 
or 
to select Exit to exit the Edit menu.
If the video in the internal 
memory is viewed now, the 
“Copy” item is disabled because the video in the internal memory cannot be copied to the external memory. e.g. an SD card
Music
Photo | Video |
Deleting music
1.During playback of music files in the internal memory of the unit (i.e.
Favorites 
), press EDIT to enter the
2.Press 
or 
to select Delete.
3.“Are you sure you want to delete
the selected file” will be displayed.
Press 
or 
to select Yes and then press 
to confirm.
4.“Delete successfully!” will be displayed.
5.Press EDIT or press 
or 
to select Exit to exit the Edit menu.
Repeat
1.During playback of music files on SD, MMC or MS card, USB or music files in internal memory of the
unit (i.e. Favorites 
), press EDIT to enter the
2.Press 
or 
to select from Repeat one, Repeat all or Shuffle and then press 
.
3.Press EDIT or press 
or 
to select Exit to exit the Edit menu.
Viewing photo
JPEG is the only supported photo file format.
1.Insert an SD, MMC or MS card into the SD/MMC/MS card slot or insert a USB flash drive into the USB connector.
2.In Main menu, press 
or 
to select the source of photo from
Card (
), USB (
) and Favorites (
) . Then press 
.
3.Press 
or 
to select 
and press 
.
4.Press 
, 
, 
or 
to highlight the desired file.
5.Press 
to start photo slideshow.
6.To pause the slideshow playback,
press 
. Press 
again to resume playback.
7.Press 
or 
once to select the previous/next photo file. Press and
hold 
or 
to skip to previous/next music file if background music is on.
8.Press and hold 
to stop slideshow and background music (if turned
on) and return to the thumbnail screen.
9.Press 
or 
to adjust the volume.
The volume bar 
will be displayed for a while once you change the volume.
If no photos are found in 
your selected source, “No file 
in the selected device” will be displayed.
Settings
1.During slideshow playback, press EDIT to pause slideshow and enter the
2.A
•Rotate – Press 
repeatedly to rotate the current photo by 90O clockwise each time.
•Zoom – Press 
repeatedly to zoom in the current photo. The zoom in feature cycles through X2, X3 and X4, then returns to normal size.
•Effect – Press 
or 
to select from Color enhancement, Black
and white, Old fashion and Normal. Then press 
to confirm.
•Copy
•Press 
or 
to select Copy and then press 
.
•“Copy to internal memory? If the same file exist will be
overwritten.” will be displayed.
Press 
or 
to select Yes and then press 
to confirm.
•“Copy successfully!” will be displayed. If the unit does not have enough free internal memory, “No enough memory” will be displayed. Delete some files before you try to copy files again.
If the photo in the internal memory is viewed now, the “Copy” item is disabled
because the photo in the internal memory cannot be copied to the external memory. e.g. an SD card
•Delete – Refer to “Deleteing photo” section below for details.
•Background music – Press 
or 
to select from iPod/iPhone, USB, Memory Card and Favorites to select playing music from which source during slideshow. Select Off
to turn off background music. Then
press 
to confirm. You can also press MUSIC ON/OFF to turn on/ off the background music during slideshow.
•Exit – Press 
to exit the
3.Press EDIT or press 
or 
to select Exit to exit the Edit menu.
The effects of “Rotate”, “Zoom” and “Effect” will be automatically resumed
to normal when the next photo is displayed during the slideshow.
Deleting photo
1.During playback of photos in the internal memory of the unit (i.e.
Favorites 
), press EDIT to pause slideshow and enter the
2.Press 
or 
to select Delete.
3.“Are you sure you want to delete
the selected file” will be displayed.
Press 
or 
to select Yes and then press 
to confirm.
4.“Delete successfully!” will be displayed.
Viewing video
The PC requirements for muvee software installation are shown below:
1.Processor: Intel Pentium 4, AMD Athlon 64 (or equivalent), 2GHz or higher
2.Memory: 1GB RAM
3.Video memory: 128MB
4.Operating system: Microsoft Windows 7, Microsoft Windows Vista, Microsoft XP Service Pack 3.
This digital photo frame only plays motion JPEG generated by muvee Reveal. Refer to
the user manual in the
1.Insert an SD, MMC or MS card into the SD/MMC/MS card slot or insert a USB flash drive into the USB connector.
2.In Main menu, press 
or 
to select the source of video from
Card (
), USB (
) and Favorites (
) . Then press 
.
3.Press 
or 
to select 
and press 
.
4.Press 
or 
to highlight the desired file.
5.Press 
to start video playback.
6.To pause the video playback, press
. Press 
again to resume playback.
7.Press 
or 
to select the previous/ next file. Press and hold 
or 
to rewind or fast forward.
8.Press and hold 
to stop video playback and return to the thumbnail screen.
9.Press 
or 
to adjust the volume.
The volume bar 
will be displayed for a while once you change the volume.
Copying video
1.During playback of video files on SD, MMC or MS card or USB, press EDIT to enter the
Video
Settings | Warranty information |
2.Press 
or 
to select Copy and then press 
.
3.“Copy to internal memory? If the
same file exist will be overwritten.”
will be displayed. Press 
or 
to select Yes and then press 
to confirm.
4.“Copy successfully!” will be displayed. If the unit does not have enough free internal memory, “No enough memory” will be displayed. Delete some files before you try to copy files again.
If the video in the internal 
memory is viewed now, the 
“Copy” item is disabled because the video in the internal memory cannot be copied to the external memory. e.g. an SD card
5.Press EDIT or press 
or 
to select Exit to exit the Edit menu.
Deleting video
1.During playback of video files in the internal memory of the unit (i.e.
Favorites 
), press EDIT to enter the
2.Press 
or 
to select Delete.
3.“Are you sure you want to delete
the selected file” will be displayed.
Press 
or 
to select Yes and then press 
to confirm.
4.“Delete successfully!” will be displayed.
5.Press EDIT or press 
or 
to select Exit to exit the Edit menu.
Repeat
1.During playback of video files on SD, MMC or MS card, USB or video files in internal memory of the
unit (i.e. Favorites 
), press EDIT to enter the
2.Press 
or 
to select from Repeat one and Repeat all and then press 
.
3.Press EDIT or press 
or 
to select Exit to exit the Edit menu.
Settings options
1.In Main menu, press 
or 
to select
. Press 
to enter Settings menu.
2.Press 
or 
to highlight a setting.
3.To change the value of date and
time, press 
or 
to highlight the options and press 
or 
to change the values. Press 
to confirm the date and time. To
change options other than date and
time, press 
or 
to change the values and then press 
to confirm.
4.Press 
to exit Settings menu.
Settings options available are:
•Image Display – To crop a photo to fit the screen or adjust to original aspect ratio.
•Slideshow Transition – To set transition effect between two photos. Options are: Random, Blinds, Melt, Mosaic, Roll, Snail and Float.
•Slideshow interval – To set the interval between two photos. Options are 5s, 15s, 30s and 60s.
•Brightness – To set the brightness of the screen. Options are High, Mid and Low.
•Date – To set the date.
•Time – To set the time.
•Time Format – To set the time format (12 hours or 24 hours).
•OSD Language – To set the language of the user interface. Options are English, French and Spanish.
•Reset Setting – To reset all settings to factory default.
•About – To show the information of the firmware and the model number.
•Exit – To go back to Main menu.
Limited warranty
12 Month Limited Warranty Applies to Acoustic Research Audio/ Video Products
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company’s option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, loss/interruptions of broadcast or internet service, to costs incurred for installation, removal or reinstallation of product, to corruptions
caused by computer viruses, spyware or other malware, to loss of media, files, data or content, or to damage to tapes, discs, removable memory devices or cards, speakers, accessories, computers, computer peripherals, other media players, home networks or vehicle electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.
How to make a warranty claim:
•If your product is capable of storing content (such as an mp3 player, digital voice recorder, etc), it is recommended to make periodic backup copies of content stored on the product. If applicable, before shipping a product, make
a back up copy of content or data
Warranty information
Illustrations contained within this publication are for representation only and subject to change.
stored on the device. Also, it is advisable to remove any personal content which you would not want exposed to others. IT IS LIKELY THAT CONTENTS AND DATA ON THE DEVICE WILL BE LOST DURING SERVICE AND REFORMATTING. AUDIOVOX ACCEPTS NO LIABILITY FOR LOST CONTENT OR DATA,
OR FOR THE SECURITY OF ANY PERSONAL CONTENT OR DATA ON THE RETURNED DEVICE. Product will be returned with factory default settings, and without any
•Properly pack your unit. Include any remotes, memory cards, cables, etc. which were originally provided with the product. However DO NOT return any removable batteries, even if batteries were included with the original purchase. We recommend using the original carton and packing materials.
•Include evidence of purchase date such as the bill of sale. Also print your name and address and a
description of the defect. Send via standard UPS or its equivalent to:
Audiovox Electronics Corp. Attn: Service Department. 150 Marcus Blvd.
Hauppauge N.Y. 11788
•Insure your shipment for loss or damage. Audiovox accepts no liability in case of damage or loss en route to Audiovox.
•Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
•A new or refurbished unit will be shipped to you freight prepaid.
What we will do:
Provide you with a new, or at our option, a refurbished unit. The exchange unit is under warranty for the remainder of the original product’s warranty period.
For Canada Customers, please ship to:
Audiovox Return Centre c/o Genco
6685 Kennedy Road, Unit#3, Door 16, Mississuaga, Ontario L5T 3A5
The descriptions and characteristics given in this document are given as a general indication and not as a guarantee. In order to provide the highest quality product possible, we reserve the right to make any improvement or modification without prior notice.
Visit http://store.audiovox.com to find the best accessories for your products.
© 2010 Audiovox Accessories Corporation
111 Congressional Blvd., Suite 350
Carmel, IN 46032
Trademark(s) ® Registered
Printed in China
