Acoustic Research AW-D510 owner manual Connection to the Audio Source, Charge the headset

Transmitter (back panel)

DC IN COAXIAL OPTICAL LINE IN

Charging cable

2.Charge the headset.

Unhook the charging cable on the transmitter’s back panel.

Plug the end of the charging cable into the recharging jack on the right headphone.

While the headphones are charging, the LED on the left headphone remains red. This LED turns off when the headphones are fully charged.

Note: To get the most from your headphones’ battery, make sure you let the headphones charge completely before you used them for the first time.

Note: Make sure the transmitter is off while you charge the headphones.

Connection to the Audio Source

The 2.4GHz wireless transmitter supports Dolby Digital 5.1 encoding through the digital optical and digital coaxial inputs. It also offers an analog connection through the LINE IN jack.

Connecting to a digital optical or digital coaxial output

Transmitter (back panel)

DC IN COAXIAL OPTICAL LINE IN

Digital		Digital
coaxial	—OR—	optical
cable		cable
Digital coaxial jack		Optical jack on
on audio source		audio source

1.Plug the digital optical or digital coaxial cable into the corresponding output jack on your audio source.

2.Connect the other end of the digital optical or digital coaxial cable to the OPTICAL or COAXIAL jack on the transmitter's back panel.