17-7
1.Disconnect all the sensor harness assembly, and LCD cable, and operation black
cable, and motor block, and FPC cable from the connectors on the 2000UL PCB
assembly˄17-1ǃ17-2˅
2.Remove two screws˄17-3˅
3.Pull out the 2000UL PCB assembly by handDŽ˄17-4˅
4.Solder down the power supply wire to pull out the 2000ULPCB asse mbly.˄17-5ǃ
17-6ǃ17-7˅