The Wireless Connectivity Expert

ACT-IR100SD OBEX Server

User’s Manual

2. OVERVIEW

The ACT-IR100SD is a high-integration IrDA Intelligent dongle. It provides a serial interface to a host device that intends to have Infrared communication capability. The host device can be any equipment or device that needs to communicate with IrDA enabled portable or tablet PC, PDA, cellphone and hand held data terminal, via IrDA protocol with only a wired serial interface. The ACT-IR100SD will handle all the detail about IrDA protocols. It sends and receives only user data to and from the host device via the wired serial interface with hardware flow-control. IrDA has two modes; one is Primary, and the other is Secondary. The difference between them is that a Primary mode device initiates discover, connection sequence and negotiate IrDA protocol parameters to Secondary mode device; while Secondary mode device always waits for commands from Primary mode device. Both modes can run different protocols, and both may send or receive user data. ACT-IR100SD supports both modes. When IR100SD is set to Primary mode, user can choose IrCOMM, IrLPT or OBEX PUT/GET server to be Primary protocol via a simple PC utility. Fig.1 is the system diagram.

Fig.1 System Diagram for Using ACT-IR100SD as a Communication MediaNotebook PC
User Host DeviceACT-IR100SD
PDA

 Copyright 2000-2006 ACTiSYS Corp.

Page 6 of 17

Oct 30, 2006

 

 

Version 1.0