| |
The Wireless Connectivity Expert | User’s Manual |
9. CONFIGURATION PARAMETERS
Figure 4: Configuration Parameters Window
9.1.UART Format
•Baud Rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 or 1843200 bps selectable.
•Data Bit: 5, 6, 7 and 8 data bits supported
•Parity Check: None, Odd or Even.
•Stop Bit: 1 or 2 stop bits.
•RTS/CTS Flow Control: None, or Enable
9.2.COM Port
Select COM1, COM2 or any other COM port you have connected.
9.3.Bluetooth Configuration
•Bluetooth Address: BD address is an unique 6 byte hexadecimal device identifier, where the first 3 bytes of the address are assigned by IEEE, and the last 3 bytes are freely allocated by the manufacturer. And the format is as (00: 0B: 00: 00: 00: 02).
•Device Name: Give any name you want to show. Maximum is 24 characters allowed.
•Password: It’s PIN code. Default is 000. You can leave it blank. Maximum length is 8 digits
Copyright | ACTiSYS Corp. | Page 8 of 18 | Dec 06, 2006 |
| Version 2.0 |