Important Placement Guidelines
•To ensure accurate temperature measurement, place units out of direct sunlight and away from heat sources or vents.
•The wired temperature probe is not waterproof and is not intended for permanent submersion in liquids. Submersion in liquid for more than 30 seconds may result in complete failure of the probe.
High & Low Records
High and low values are recorded for display (indoor) and probe (outdoor) temperature and humidity. High and low records reflect the minimum and maximum temperature and humidity record in the last 24 hours. High and low records automatically reset at 12:00am.
To view the HIGH and LOW indoor (display) temperature records, press and release the “TEMP MAX/MIN” button. The “MAX” and “MIN” icons appear on the display next to the high and low records.
To view the HIGH and LOW outdoor (probe) temperature record, press and release the “TEMP MAX/MIN” button twice. The “MAX” and “MIN” icons appear on the display next to the high and low records.
To view the HIGH indoor (display) humidity record, press and release the “HUMIDITY MAX/MIN” button. The “MAX” icon appears on the display next to the high record.
To view the LOW indoor (display) humidity record, press and release the “HUMIDITY MAX/MIN” button twice. The “MIN” icon appears on the display next to the low record.
To reset the HIGH and LOW records, press the “CLEAR” button while viewing the high and low records you wish to clear. Dashes will display to confirm the values have been cleared.
Troubleshooting
Inaccurate | • Make sure both the display unit and sensor are | |
placed out of direct sunlight and away from any heat | ||
temperature | ||
sources or vents. | ||
| ||
|
| |
Display screen | • Check that the batteries are installed correctly. | |
not working | Batteries may need to be replaced. | |
|
|
Specifications
Temperature Range | Display: 32°F to 122°F; 0°C to 50°C |
| Probe: |
Humidity Range | Display: 16% – 98% RH (relative humidity) |
POWER | 1 x AAA alkaline battery |
5
