Acu-Rite 02005TBDI Replace Intelli-TimeClock Battery, Calibration Calibrate Weather Forecast

Replace Intelli-Time®Clock Battery

Intelli-Time technology is powered by a pre-installed coin-cell battery that stores the time and date settings. The battery has a shelf life of several years. To replace the Intelli-Time battery:

1.Locate the coin cell battery inside the battery compartment of display unit. Unscrew and remove the compartment cover.

CR2032

3V

2.Insert 1 x CR2032 coin cell battery into the battery compartment, as shown. Install battery with “+” positive terminal facing OUT.

3.Screw in the battery cover.

Calibration

Calibrate Weather Forecast

The forecast can be calibrated on the display unit to improve accuracy when sensor placement or environmental factors impact your data accuracy. The calibration increases or decreases the amount of moisture in the forecast algorithm. For example, if you feel the forecast is showing rain too often you may want to remove 10% of the moisture from the forecast equation.

1.To enter calibration mode, press and HOLD the “p” and “q“ buttons for at least 3 seconds.

2.The “ “ will begin flashing, indicating it is ready to be calibrated.

3.Press the “p” button to increase moisture in the forecast or press the “q“ button to remove moisture from the forecast.

4.Press the “SET” button to confirm the calibration adjustment, or after 20 seconds of inactivity the display will automatically save your adjustments and exit calibration mode.

12