OPERATION
Using the Alarm Clock
Set Alarm Time
Press and release the “” button to enter ALARM SET MODE.
To adjust the currently selected (flashing) item, press and release the “” or ““ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “” button to adjust the next preference. The preference set order is as follows:
ALARM CLOCK HOUR
ALARM CLOCK MINUTE
ALARM EVERY DAY or WEEKDAY ONLY SELECTION
You will automatically exit ALARM SET MODE if no buttons are pressed for 5 seconds. Enter setup mode at any time by pressing the “” button.
Momentary Backlight
During power adapter use, press the Snooze button for momentary backlight at 100% brightness. During
Moon Phase
Track the phases of the moon, conveyed through simple lunar phase icons.
NEW | WAXING | 1ST | WAXING | FULL | WANING | 3RD | WANING |
| CRESCENT | QUARTER | GIBBOUS |
| GIBBOUS | QUARTER | CRESCENT |
USB Charging
Charge your mobile device by plugging your device’s USB power cord (not included) into the USB charging port on the back of the alarm clock.
USB charging is only available during power adapter use; USB charging is not active when operating on
DC 4.5 v | CHARGE |
| USB DEVICE |
Note: Follow the manufacturer’s instructions for your mobile device(s) to determine compatibility with the USB charging
feature on this product. Some devices may not support USB
charging or may require a higher power rating than this product provides. Observe the charging status on your device. Ensure your device is working properly before attempting to charge.
9