SETUP
Clock Setup
2
13
Install or Replace Batteries
1Remove battery compartment cover.
2Insert 2 x AAA alkaline batteries into the battery compartment, as shown. Follow the polarity
3Replace the battery cover.
Set & Forget® Clock
Set & Forget® clock and calendar are
Set the Time & Date
Choose the correct time zone (HAST AKST PST MST CST EST AST) using the “TIME ZONE” dial on the bottom of the clock in the battery compartment.
Choose Daylight Savings Time ON or OFF using the DST switch on the top of the clock. If you live in an area that observes Daylight Savings Time, DST should be set to ON, even if it is not currently Daylight Savings Time.
Press and release the “TIME SET” button to enter the SET MODE. Once in the SET MODE the preference you are currently in will blink on the clock.
To save your adjustments, press and release the “TIME SET” button to adjust the next preference. The preference order is as follows:
CALENDAR DATE
CALENDAR YEAR
TIME (Please note PM Indicator light)
You will not automatically exit SET MODE until “TIME SET” is pressed after adjusting the time. Enter SET MODE any time by pressing and releasing “TIME SET”.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity
4