General Timer Description:
This is a countdown timer (this means that when the timer reaches 00:00 it will sound an alarm). The alarm will sound for 1 minute at 75 db.
2 • INSTRUCTIONS FOR USE
1.The timer is “always on”.
2.In sleep mode LCD will display 00:00:00. This will not drain battery.
3.MINUTES: Press the “MINUTES” button until desired number reached. Hold the “MINUTES” button down to activate “rapid advance”.
4.SECONDS: Press the “SECONDS” button until desired number reached. Hold the “SECONDS” button down to activate “rapid advance:.
5.START/STOP: Pressing the “START/STOP” button without entering a time causes the timer to start counting up. Pressing the “START/STOP” button after entering a time will cause the timer to start counting down from the time entered.
6.CLEAR: Press the “CLEAR” button to clear the time displayed.
When timer is set but NOT running:
Press the “START/STOP” button to begin counting down from the time entered.
When the timer is running:
Press the “START/STOP” button to stop the countdown.
General Timer Description: This is a countdown timer (this means that when the timer reaches 00:00 it will sound an alarm). The alarm will sound for
1 minute at 75 db.
3 • WARNING
WARNING: Do not place on or near hot surfaces. Do not immerse unit in water.
- 2 -
Product Registration
To receive product information, register your product online. It’s quick and easy!
Log on to http://www.chaneyinstrument.com/product_reg.htm
- 3 -
