Chapter 8: Installing the Driver on an Existing Operating System 39
4Follow the on-screen instructions to complete the driver installation.
5Remove the driver disk and restart your computer.
6Continue with Managing Your Storage Space on page 41.
Installing on Red Hat or SuSE Linux
To install the module on Red Hat or SuSE Linux:
1Insert and mount the RAID Installation C D:
Red Hat—
mount /dev/cdrom /mnt/cdrom
SuSE
mount /dev/cdrom /media/cdrom
2Install the module RPM:
rpm -Uvh mount-point/xxx/yyy.rpm
where
mount-point
is the specific mount point on the Linux system,
xxx
is the driver path,
and
yyy.rpm
is the rpm file.
3Run fdisk, mkfs, and create mount points for any new disk drives.
4Continue with Managing Your Storage Space on page 41.
Installing on NetWare
Note: Before you begin, ensure that your NetWare operating system has been upgraded to
the minimum patch level specified by Novell. Refer to the Novell Web site for more
information.
To install the driver on NetWare:
1Start your computer.
2From the NetWare server console prompt, type
load hdetect
,
then
press Enter.
3From the Device types menu, select Continue
,
then press Enter.
4From the Device type option, select Modify
,
then press Enter.
5Select Storage Adapters
,
then press Enter.
6From the Additional Driver Options menu, select Modify
,
then
press Enter.
7From the Driver Name menu, press the Insert key.
8Insert the driver disk, press the Insert key, then press F3.
9From the A:\
prompt, press Enter.
The driver installs.
10 From the Additional Driver Option menu, select Return to driver summary
,
then
press
Enter.
11 From the Driver ty pe menu, select Load on Addit ional Driver Options.
12 After the driver loads, select Continue.
13 Continue with Managing Your Storage Space on page 41.