Installing the Device Drivers

Installing on Macintosh Computers

Follow the installation instructions for your Macintosh operating system.

Macintosh OS X

The drivers for your DuoConnect card are imbedded in Macintosh OS X. See DuoConnect and Deep Sleep on page 30 to continue.

Macintosh OS 9.x

In this procedure, you install the DisableSleep driver, which prepares your Macintosh computer to use the DuoConnect card.

Note: Blue and white G3s are not supported.

1Turn on or restart the computer and insert the DuoConnect CD.

2Double-click the Start Installation Here file on the CD.

3Follow the instructions to install the latest Macintosh USB drivers, if necessary.

4Double-click the DuoConnect Installer file and follow the instructions.

5After the installation is complete, click Restart, if necessary, to make the new settings take effect.

6Verify that the card is seen by your computer by clicking Apple System Profiler in the Apple Menu. Then, click the Devices and Volumes tab.

Note: The Apple System Profiler (version 2.5.8 or earlier) identifies the DuoConnect adapter incorrectly. If you have one of these earlier versions, download a new version from Apple's software update page.

28