Page 1 of 2
CRAFT INTERFACE SYSTEM LOGON
Summary: This procedure provides instructions for logon to the Craft Interface system. Logging on consists of connecting the control terminal or host computer to the Soneplex Broadband chassis, entering the communication rate, user name and password, then setting the serial port configuration.
1.Connect chassis to control terminal or host computer. Reference:
2.Locate power switch on terminal or computer and turn power on. Press Enter or Return. If using a computer, enter the communications software package resident on the computer.
3.At the Enter User Name field on the Logon screen (Figure
4.The Craft Interface requests a password. Enter your assigned password or, if the SONEPLEX user name was used in Step 3, enter SONEPLEX1 (uppercase only). Press Enter or Return.
5.The welcome message and Main Menu (Figure
6.If this is your initial use of the Craft Interface System, or if you are changing communication device parameter settings, perform the Serial Port Configuration procedure. Otherwise, proceed to Step 7.
Note: Make the initial Craft Interface connection to the Craft port on the front of the
MPU. Initial communication parameter settings for this port are: 9600 baud, no parity, 8 data bits, 1 stop bit.
Reference:
Note: Changes to port configurations take effect when you log off and then log back on to the system.
Reference:
7.Use the arrow or number keys to select a
Note: The second line from the bottom of the screen displays any
Stop! You have completed this procedure.
© 2000, ADC Telecommunications, Inc.