Page 1 of 2
MENU SECURITY EDITING
Summary: This procedure provides instructions to system administrators for assigning or changing access user privilege levels to the Craft Interface menus.
Note: A “toggle” field type means the user can press the space bar to view and select the next option that is described; or the user can press the “R” key to view and select the previous option. An “input” field type means the user must type an entry in the field according to the parameters described. A “fixed” field is locked, and cannot be changed by the user.
Note: Edits can be made in the configuration database in one of two ways: 1) If the complete field is highlighted, use the space bar to toggle forward or the “R” key to reverse toggle through the options for that field. 2) If only the first space or the field is highlighted, type in the data that applies to that field.
Note: Edits to the configuration database can be saved after each change in one of two
ways: 1) Press an arrow key and then Enter or Return once; or 2) Press Enter or Return twice after all selections and entries are made in the screen but before leaving the screen.
Note: Press
1.Use the arrow keys to select System Administration from the Main Menu. Press Enter or Return.
2.Select Edit Menu Security from the System Administration menu. Press Enter or Return. An Edit Menu Security screen (with default settings) appears as shown in Figure
3.Use the arrow keys to move the cursor to the Privilege toggle field. Use the space bar to select the privilege level (1 to 5). The lowest security level is 1; the highest level is 5.
•Users assigned Level 5 have access to all menu selections; Level 5 is assigned to the system administrator.
•Level 3 is often assigned to the operating technician; users have access to Levels 1, 2, and 3.
•Level 2 is normally assigned to a local technician; users have access to Levels 1 and 2.
•Users assigned Level 1 have access to only those menus assigned a Level 1.
4.Repeat Step 3 for each Main Menu Selection that you wish to change.
Note: Disregard the QLX Alarm Levels and QLX Configuration selections. The MPU software installed is used with either the Soneplex Broadband system or the Soneplex Loop Extender. QLX modules are not used in the Broadband chassis.
5. Assign the selections by pressing Enter or Return.
Stop! You have completed this procedure.
© 2000, ADC Telecommunications, Inc.