ADC Broadband System manual 157

ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance

DLP-541

Page 5 of 16

DS3 MUX LOOPBACK

SELECTION FIELD

High Speed Loopback Status/Commands

Unit Location -		LOCAL
	===========
COMMANDS:
Loopback :
STATUS:
Unit Type:		DS3MUX
	+---------	+
-----------------	>--------	>-----------------	>
NETWORK DS3			DEMUX
<-----------------	<	--------<-----------------
	fac term
	+---------	+

Press CONTROL-A For Assistance

6665-C

Note: Do not perform a DS3 loopback when the Soneplex Broadband chassis

is connected to a DS3 CAM unit in the Soneplex CCAS system.

Figure 541-3. High Speed (DS3 MUX) Loopback Status/Commands Screen

HLXC LOOPBACK	HRX LOOPBACK	HLXR LOOPBACK
SELECTION FIELD	SELECTION FIELD	SELECTION FIELD

			Low Speed Loopback Status/Commands
				Group: 1			DS1#: 4
Unit Location -			LOCAL			REPEATER			REMOTE
COMMANDS:	===========				===========			===========
Loopback:
STATUS:
Unit Type:			HLXC			HRX1			HLXR
	+---------		+		+---------		+	+---------		+
--------------	>--------		>--------		>--------		>--------	>--------		>-------------	>
NETWORK											CUSTOMER
DS1			HDSL				HDSL				DS1
<--------------	<		--------<--------		<--------		<--------	<--------		<-------------
		net cust			net		cust	net		cust
	+---------		+		+---------		+	+---------		+

Programmable Loopback Armed State: ARMING DISABLED

Press CONTROL-A For Assistance

11379-A

Figure 541-4. Low Speed Loopback Status/Commands Screen

2-134

© 2000, ADC Telecommunications, Inc.