ADC Broadband System manual 159

ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance

DLP-541

Page 7 of 16

High Speed Loopback Status/Commands

Unit Location -		LOCAL
	===========
COMMANDS:
Loopback :		ACT NET
STATUS:
Unit Type:		DS3MUX
	+---------		+
-----------------	>----	+	-----------------	>
NETWORK DS3				DEMUX
<-----------------	<	---+	<-----------------
	fac		term
	+---------		+

Press CONTROL-A For Assistance

6666-C

Note: Do not perform a DS3 loopback when the Soneplex Broadband chassis

is connected to a DS3 CAM unit in the Soneplex CCAS system.

Figure 541-5. DS3 MUX Network Loopback Screen

			Low Speed Loopback Status/Commands
				Group: 4	DS1#: 1
Unit Location -		LOCAL			REPEATER		REMOTE
	==========				==========	==========
COMMANDS:
Loopback:					N/A
STATUS:
Unit Type:		HLXC			NONE		HLXR
	+	---------		+		+---------	+
--------------	>	--+	+->----------------------------			>---------	-------------	>
NETWORK								CUSTOMER
DS1					HDSL			DS1
<--------------	<-+		+--	<----------------------------		<	--------<-------------
	net		cust			net cust
	+	---------		+		+---------	+
Programmable				Loopback Armed State: ARMING DISABLED
				Press CONTROL-A For Assistance

11381-A

Figure 541-6a. HLXC Customer Loopback Screen

2-136

© 2000, ADC Telecommunications, Inc.