ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance

DLP-548

Page 1 of 5

HLX AND HRX STATUS DISPLAY

Summary: This procedure provides instructions for displaying the status of the HLX modules installed in the central office chassis, the associated HLX modules at the remote end of the circuit, and the HRX modules.

Note: Press CONTROL-A for help information about moving around and editing fields.

1.Use the arrow keys to select Display HLX Status from the Display Status menu. Press Enter or Return.

2.Use the arrow keys to select HLX Status from the Display Status menu. Press Enter or Return. Refer to Table 548-1for descriptions of status screens, and status locations displayed on the screens.

3.Move to the Group toggle field. Select group number 1, 2, 3, 4, 5, 6, or 7. Reference: TAD-106Access Identifier

4.Move to the Slot toggle field. Select slot number 1, 2, 3, or 4.

Stop! You have completed this procedure.

Table 548-1. Status Locations

HLXC/HLXR

MPU SOFTWARE

STATUS

SCREEN

STATUS

STATUS LOCATION

SYSTEM TYPE

VERSION

SCREEN

FIGURE

LOCATIONS

DESCRIPTIONS

No HRX

V5.1

HLX Status

Figure 548-1

N/A

None

 

 

 

 

 

 

One HRX

V5.1

HLX/HRX

Figure 548-2

C-SIDE,

Figure 548-4

 

 

Status

 

R-SIDE

 

 

 

 

 

 

 

One or two

V5.2

HLX/HRX

Figure 548-3

CRP1, RRP1,

Figure 548-5

HRXs

 

Status

 

CRP2, RRP2

 

 

 

 

 

 

 

Note: If one or no HRX is present in a two-repeater system, or no HRX is present in a one-repeater system, the screens will show “N/A” in the related HRX column.

2-160

© 2000, ADC Telecommunications, Inc.