ADC Broadband System manual 187

ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance

DLP-548

Page 5 of 5

			CRP1		RRP1		CRP2		RRP2
	NEND									FEND
			XCVR		XCVR		XCVR		XCVR
		LOOP 1				LOOP 1				LOOP 1
HLXC				HRX1				HRX2			HLXR
		LOOP 2				LOOP 2				LOOP 2
			XCVR		XCVR		XCVR		XCVR
	NEND					FEND
TO NETWORK			CRP1		RRP1		CRP2		RRP2	TO CUSTOMER

KEY

NEND means "at the HLXC, looking toward the customer (HLXR)."

FEND means "at the HLXR, looking toward the network (HLXC)."

CRP1 means "at the central office side of the HRX1, looking toward the network (HRX2/HLXR)."

RRP1 means "at the remote (CPE) side of the HRX1, looking toward the customer (HLXC)."

CRP2 means "at the central office side of the HRX2, looking toward the network (HLXR)."

RRP2 means "at the remote (CPE) side of the HRX2, looking toward the customer (HRX1/HLXC)."

CRP1 (Alarm History, PM Reports, and Status screens) = LINE 1 (TL1)

RRP1 (Alarm History, PM Reports, and Status screens) = LINE 2 (TL1)

CRP2 (Alarm History, PM Reports, and Status screens) = LINE 3 (TL1)

RRP2 (Alarm History, PM Reports, and Status screens) = LINE 4 (TL1)

NOTE: CRP2 and RRP2 are not present when there is no HRX2. 11375-A

Note: NEND and FEND are not reported in HLX/HRX Status screens

Figure 548-5. HDSL HLXC/HLXR CRP and RRP Locations (MPU V5.2 With Two HRXs)

2-164

© 2000, ADC Telecommunications, Inc.