Page 4 of 6
Table
FIELD | TYPE | OPTIONS | DESCRIPTION | DEFAULT |
Group | Toggle | 1, 2, 3, 4, 5, 6, or 7 | Specifies the module’s group | Blank |
|
|
| number designated on the chassis. |
|
|
|
|
|
|
Slot | Toggle | 1, 2, 3, or 4 | Specifies the module’s slot number | Blank |
|
|
| designated on the chassis. |
|
|
|
|
|
|
Circuit ID | Input | Up to 20 characters. | This represents the customer’s circuit | Blank |
|
|
| ID. The first and last characters must |
|
|
|
| be alpha or numeric; middle |
|
|
|
| characters can be alpha, numeric, or |
|
|
|
| hyphens. Note: This field can be |
|
|
|
| configured only after the T1 |
|
|
|
| Provision field (described in DLP- |
|
|
|
| 531) is set to YES. |
|
|
|
|
|
|
HLXC Activation | Input | 16 binary characters (0’s | 1101 0011 1101 0011 | |
Code |
| and 1’s) must be entered. | binary value except: all 0s, all 1s, or |
|
(“Activation Code” is |
|
| a value that is already used in another |
|
equivalent to |
|
|
| |
“Programmable |
|
| inband. HDSL units go to loopup |
|
Code.”) |
|
| state when they are in armed state. |
|
|
|
| Loopup is activated for selected |
|
|
|
| units. Detection time is 3 secs. |
|
|
|
|
|
|
HLXC Programmable | Toggle | ENABLED | Enables response to programmable | MPU V5.1: |
Lpbk |
|
| loopback codes and overrides | DISABLED |
|
|
| hardware configuration settings. |
|
|
|
|
| MPU V5.2: |
|
| DISABLED | Disables response to programmable | |
|
|
| loopback codes and overrides | ENABLED |
|
|
| hardware configuration settings. |
|
|
|
|
|
|
ESF Inband Loopback | Toggle | ENABLED* | Version E HLXC: Enables ESF | Version E HLXC: |
|
|
| inband loopback. | ENABLED |
|
|
|
|
|
|
| DISABLED* | Version E HLXC: Disables ESF | Version D or earlier |
|
|
| inband loopback. | HLXC: N/A |
|
|
|
|
|
|
| N/A | Version D or earlier HLXC only: |
|
|
|
| this field cannot be configured. |
|
|
|
|
|
|
*In order for the ESF Inband Loopback field to be configured, some HLX Unit Configuration screen fields must be configured as follows: Unit Equip State = EQUIPPED, Unit Service State = IS, T1 Provision = YES, TI Service State = IS, and T1 Framing Format = ESF.
(continued)