ADC FlexWave Universal Radio Head, Alarm and Management System, Network Monitoring Capabilities

FlexWave™ Universal Radio Head

Flexible Outdoor Coverage and Capacity

Universal Radio Head

Alarm and Management System

The URH utilizes an embedded network management for system configuration and network monitoring. The element management system (EMS) utilizes a web based interface or SNMP protocol for easy accesses to the system.

The Element Management System (EMS) provides operational and maintenance capabilities for the URH system (Host and Remote). The EMS can be used to access and monitor status of any Host and any associated Remote Units. The EMS has the ability to view status and parameter settings, download software, change parameters and monitor system performance and alarms

Access and troubleshooting can also be accomplished on-site at either the Host Unit and/or the Remote Unit by utilizing a craft interface. Thus, allowing technicians the ability to plug-in a laptop and access all associated units connected to it.

Network Monitoring Capabilities

The embedded EMS allows for remote alarm monitoring and network control of the URH can also be performed from an off-site location or Network Operation Center (NOC). Communications to the NOC can be performed using the web based interface or SNMP protocol.

The EMS performs the following functions at off-site locations such as the NOC:

•Provides real-time information regarding faults

•Displays various system level values (voltages, RF, power, etc.)

•Adjusts performance-related parameters of the Host Unit and Remote Unit

•Permits placement of Host Unit and Remote Unit into standby mode

•Access records and generates history reports with time and date stamps

•Allows download of new software versions to the Host Unit and Remote Units

4 / 0 8 • 1 0 5 5 0 2 A E   FlexWave™

Host Site Capabilities

The EMS performs the following functions at the Host site:

•Provides real-time information regarding faults

•Set up simulcast ratios

•Digital timing delays

•Displays various system level values (voltages, RF, power, etc.)

•Records and generates history reports with time and date stamps

•Adjusts performance related parameters of the Host Unit and Remote Unit

•Permits placement of Host Unit and Remote Unit into standby mode

•Allows download of new software versions to the Host Unit and Remote Units

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 6