ADC GigE Series manual Specifications

6 / 0 7 • 1 0 4 5 3 8 A E UniPatch GigE Series

UniPatch® GigE Series

Specifications

ELECTRICAL
Characteristic Impedance:	100 Ohms typical
Voltage Rating:	500 Volts AC @ 60 Hz with a trip current of 1 milliamp for 1 minute
NEXT:	Category 5e channel compliant
FEXT:	Category 5e channel compliant
Contact Resistance:	.02 Ohm maximum change post environmental
Insulation Resistance:	5000 Megohms minimum initial
MECHANICAL
Mechanical Durability:	30,000 cycles min (front port: dense pack); 50 cycles min (LSA slot)
Insertion Force:	7 lbs maximum
Withdrawal Force:	2 lbs minimum
Patch Cord Cable Bend and Twist: 500 cycles minimum
Dimensions:	2 rack unit
ENVIRONMENTAL
Thermal Shock:	-40°C to 65°C operating; -55°C to 85°C non-operating
Moisture Resistance:	0% to 95%; MIL-STD-202 Method 106
Corrosion (Salt Spray):	MIL-STD-202 Method 101, Test Condition B
Flammability:	UL 94-VO rated
Vibration:	MIL-STD-202 Method 201
Solvent Resistance:	MIL-STD-202 Method 215
FINISH
Sheetmetal Panel:	.075 CRS w/ protective black finish
Plastic Housings:	ABS/PC, deep blue color
Contact Springs:	50 microinch gold plating MIL-G-45204 Type 1
PC Board:	FR-4 with gold plated contacts
Card Edge Connector:	LSA-PLUS: Krone 17-position termination block

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1