LTPH-UM-1234-01 | PG-Flex Deployment |
| |
PG-FLEX DEPLOYMENT
Figure 2 shows a typical HDU-409 List 2 or List 3 installation for the PG-Flex subscriber carrier system. For each doubler installed between the PG-Flex Central Office Terminal (COT) and Remote Terminal (RT), two auxiliary power pairs are required between the COT and RT. A maximum of two doublers may be installed in a PG-Flex system.
Auxiliary Power Pairs
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
PG-Flex | | Span 1 | | HDU-409 | | Span 2 | PG-Flex |
| | | Doubler | | | |
| COT | | | | | | | RT |
| | HDSL | | | | HDSL |
| | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
9,000' 26 AWG | | 9,000' 26 AWG |
12,000' 24 AWG | | 12,000' 24 AWG |
| | | |
| | | |
9,000' 26 AWG or 12,000' 24 AWG (without Doubler)
H0079-A
Figure 2. Typical HDU Installation with PG-Flex
HDU-409 Lists 1, 2, and 3 | April 30, 2003 | 7 |
